ANSYS11.0说有整合ICEPRO，那这个12.0有没有ICEPRO呢
见以下红色加粗英文字
ANSYS PRODUCTS 11 Inc SP1 有限元分析简介
::::::English Description::::::
ANSYS, Inc. Software Products
Multiphysics
ANSYS Multiphysics
ANSYS Multiphysics software is a comprehensive coupled physics tool combining structural, thermal, computational fluid dynamics (CFD), acoustic and electromagnetic simulation capabilities in a single engineering software solution.
Mechanical
ANSYS DesignSpace
ANSYS DesignSpace software is an easy-to-use simulation software package that provides tools to conceptualize, design and validate ideas on the desktop. A subset of the ANSYS Professional product, ANSYS DesignSpace allows users to easily perform real-world, static structural and thermal, dynamic, weight optimization, vibration mode, and safety factor simulations on all designs without the need for advanced analysis knowledge.
ANSYS Fatigue
ANSYS Fatigue software provides the capability to simulate performance under anticipated cyclic loading conditions over the anticipated product life span.
ANSYS Mechanical
ANSYS Mechanical software offers a comprehensive product solution for structural linear/nonlinear and dynamics analysis. The product offers a complete set of elements behavior, material models and equation solvers for a wide range of engineering problems. In addition, ANSYS Mechanical offers thermal analysis and coupled-physics capabilities involving acoustic, piezoelectric, thermal–structural and thermal–electric analysis.
ANSYS Professional
ANSYS Professional software offers a first step into advanced linear dynamics and nonlinear capabilities. Containing the power of leading simulation technology in an easy-to-use package, ANSYS Professional tools provide users with high-level simulation capabilities without the need for high-level expertise. The package comes complete with a full contingent of linear elements, significant nonlinearities, the ability to solve complex assemblies — including shell-to-solid — and the most requested set of solvers.
ANSYS Structural
ANSYS Structural software addresses the unique concerns of pure structural simulations without the need for extra tools. The product offers all the power of nonlinear structural capabilities — as well as all linear capabilities — in order to deliver the highest-quality, most reliable structural simulation results available. ANSYS Structural easily simulates even the largest and most intricate structures.
Robust Design
ANSYS DesignXplorer
ANSYS DesignXplorer software adds advanced parametric control to permit study of the simulation response to proposed modifications. The module enables engineers to perform Design of Experiments (DOE) analyses of any ANSYS Workbench simulation, including those with CAD parameters.
ANSYS Mesh Morpher
By working with a mesh and not the solid model, the ANSYS Mesh Morpher module allows parameterization of models created from CAD data, nonparametric geometry data such as IGES or STEP, or mesh files such as the ANSYS .cdb file.
Explicit Analysis
ANSYS AUTODYN
ANSYS AUTODYN software is an explicit analysis tool for modeling the nonlinear dynamics of solids, fluids and gas as well as their interaction.
ANSYS Drop Test
The ANSYS Drop Test module provides unique parameters for simulation and analysis by adding a complement of loads and conditions tailored specifically for such analyses.
ANSYS LS-DYNA
For simulating complex, nonlinear phenomena that result from processes producing deformations, ANSYS LS-DYNA helps engineers understand the complexities involved with crash tests, metal forging, stamping and catastrophic failures.
Pre- and Post-Processing
ANSYS AI*Environment
The ANSYS AI* Environment product provides powerful pre- and post-processing tools with links to robust solvers. The software offer a direct path from computer-aided design (CAD) to complete computer-aided engineering (CAE) pre- and post-processing.
ANSYS DesignModeler
ANSYS DesignModeler software provides modeling functions unique for simulation that include detailed geometry creation, CAD geometry modification and concept model creation tools.
ANSYS ICEM CFD
ANSYS ICEM CFD software provides sophisticated geometry acquisition, mesh generation, post-processing and mesh optimization tools.
ANSYS TurboGrid
ANSYS TurboGrid software provides automated mesh creation tools for designers and analysts of rotating machinery. The product enables users to create a high-quality hexahedral mesh while preserving the underlying geometry, allowing for accurate and fast CFD analysis.
GAMBIT
GAMBIT software provides comprehensive, automatic and handcrafted meshing for a wide range of CFD applications. The product allows users to build geometries using basic construction tools; it can also import and repair geometry files from virtually any CAD system.
TGrid
TGrid software is a meshing product that offers users the ability to repair surface meshes and create hybrid, unstructured volume meshes for very large and complex geometries.
Computational Fluid Dynamics (CFD)
ANSYS AutoReaGas
A 3-D CFD-based tool, ANSYS AutoReaGas software is used to model gas explosions and subsequent blast effects, especially where congestion and confinement have significant effects on flame acceleration and overpressures.
ANSYS CFX
ANSYS CFX software is a powerful and flexible general-purpose computational fluid dynamics (CFD) package used for engineering simulations of all levels of complexity. It offers a comprehensive range of physical models that can be applied to a broad range of industries and applications.
FloWizard
FloWizard software is a rapid flow modeling tool that allows design and process engineers to quickly and accurately validate designs much earlier in the product development cycle.
FLUENT
FLUENT software is a powerful and flexible general-purpose computational fluid dynamics (CFD) package used for engineering simulations of all levels of complexity. It offers a comprehensive range of physical models that can be applied to a broad range of industries and applications.
FLUENT for CATIA V5
The FLUENT for CATIA V5 product fully integrates the rapid flow modeling technology of FLUENT software into the CATIA V5 product lifecycle management (PLM) process, allowing engineers to design, analyze and optimize all within the single workflow environment.
POLYFLOW
An advanced finite element-based tool, POLYFLOW software contains an extensive library of viscoelastic fluid models and is ideal for the analysis of polymer processing, glass forming and other materials processing applications.
Application Focused
Electronics
ANSYS Emag
ANSYS Emag software addresses the analysis needs of the low-frequency electromagnetics industry, including electric motors, relays, solenoids, toroids, induction heating, accelerators,
geophysical/medical instruments and magnet design.
ANSYS Iceboard
ANSYS Iceboard software provides thermal analysis tools for simulating PC boards (PCBs).
ANSYS Icechip
ANSYS Icechip software addresses thermal optimization in the design phase by allowing analysts to accurately characterize package during design. The tool interfaces with industry-recognized package design tools.
ANSYS Icemax
ANSYS Icemax software, based on state-of-the-art finite volume field solver technologies, is an advanced parasitic extraction tool for analyzing complex IC package designs.
ANSYS Icepak
ANSYS Icepak software addresses thermal management by predicting air flow and heat transfer at the component-level, board-level or cabinet-level.
ANSYS Icepro
ANSYS Icepro is the MCAD-to-Icepak translation software that allows users to migrate from mechanical CAD design to ANSYS Icepak in the most efficient manner.
ANSYS TAS
ANSYS TAS software is a general-purpose thermal modeling tool.
Icewave
Icewave software is designed for simulating advanced electromagnetic compatibility (EMC) and electromagnetic interference (EMI) of electronics systems and PCBs.
HVAC
ANSYS Airpak
ANSYS Airpak software enables engineers to accurately and easily model airflow, heat transfer, contaminant transport and thermal comfort related to the design and performance of ventilation systems.
Offshore
ANSYS AQWA
ANSYS AQWA software is a suite of integrated modules that addresses analysis requirements associated with hydrodynamics of many structures, including spars, mooring systems and ships.
ANSYS ASAS
ANSYS ASAS software is an offshore structural finite element system used to address the specific construction needs of offshore and marine engineers.
Turbomachinery
ANSYS BladeModeler
ANSYS BladeModeler software is a specialized, easy-to-use tool for the rapid 3-D design of rotating machinery components such as pumps, compressors, fans, blowers, turbines, expanders, turbochargers, and inducers.
Academic
ANSYS Academic Products
The academic product portfolio from ANSYS, Inc. is based on three usage tiers: Associate, Research and Teaching. Each tier includes a range of products covering a variety of physics and more advanced coupled field (multiphysics) solver capability. In addition, Academic Toolbox products address high-performance computing (HPC) and specialized preprocessing concerns.
ANSYS ED
ANSYS ED is a student-level product for both academic and commercial users. It offers an affordable introduction to ANSYS capabilities for simulation and virtual prototyping. ANSYS ED includes many of the features available in the full commercial ANSYS Multiphysics and ANSYS LS-DYNA product combination, with geometry and numerical problem size limitations.
FlowLab
FlowLab software is a student-friendly product that uses the power of flow visualization through CFD to teach basic fluid mechanics principles in the engineering classroom.
|
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡